COM50T5123XLC supports display 320(RGB)×240 (QVGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. It features active area of 100.8(W)×75.6(H) mm, outline size of 108.3(W)×87.55(H)×3.2(D) mm, viewing area size of 104.10(W)×78.90(H) mm, with surface treament of Hard coating (3H), net weight of 60.5g (Typ.). As a TN, Normally White, Transmissive LCM product, COM50T5123XLC can provides 600 cd/m² display brightness 400:1 transimissive contrast ratio, 80/80/80/80 (Typ.)(CR≥10) (L/R/U/D) viewing angle , and response time of 40/60 (Max.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit / 6-bit + Hi-FRC gray scale signal for each dot, thus presenting a palette of 262K/16.7M colors. This product adopted 6S2P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 50K hours, external backlight driver is additionally needed. COM50T5123XLC utilizes Parallel RGB (1 ch, 6/8-bit) as it's signal inputting systerm, which connected by 67 pins FPC with power supply voltage of 3.0V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-08-07
COM50T5117GTC supports display 320(RGB)×240 (QVGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. It features active area of 100.8(W)×75.6(H) mm, outline size of 108.3(W)×87.55(H)×4.65(D) mm, net weight of 80.0g (Typ.). As a TN, Normally White, Transmissive LCM product, COM50T5117GTC can provides 320 cd/m² display brightness 60:1 transimissive contrast ratio, 40/40/20/65 (Min.)(CR≥10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 40/60 (Max.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors. This product adopted 6S2P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 10K hours, external backlight driver is additionally needed. COM50T5117GTC utilizes Parallel RGB (1 ch, 8-bit) as it's signal inputting systerm, which connected by 67 pins FPC with power supply voltage of 3.0V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-07-22
COM50T5119GLC is a 5.0 inch diagonal a-Si TFT-LCD display screen product from CASIO, with a built-in WLED backlight, without backlight driver, without touch screen. COM50T5119GLC supports display 320(RGB)×240 (QVGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 100.8(W)×75.6(H) mm, outline size of 108.3(W)×87.55(H)×3.2(D) mm, with surface treament of Hard coating (3H), net weight of 60.5g (Typ.). As a TN, Normally White, Transmissive LCM product, COM50T5119GLC can provides 400 cd/m² display brightness 60:1 transimissive contrast ratio, 40/40/20/65 (Min.)(CR≥10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 40/60 (Max.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors. This product adopted 6S2P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 10K hours, external backlight driver is additionally needed. COM50T5119GLC utilizes Parallel RGB (1 ch, 8-bit) + SPI as it's signal inputting systerm, which connected by 67 pins FPC with power supply voltage of 3.0V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-07-22
COM50T5124XTC supports display 320(RGB)×240 (QVGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. It features active area of 100.8(W)×75.6(H) mm, outline size of 108.3(W)×87.55(H)×4.65(D) mm, with surface treament of Hard coating (3H), net weight of 80.0g (Typ.). As a TN, Normally White, Transmissive LCM product, COM50T5124XTC can provides 480 cd/m² display brightness 400:1 transimissive contrast ratio, 80/80/80/80 (Min.)(CR≥10) (L/R/U/D) viewing angle , and response time of 40/60 (Max.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit / 6-bit + Hi-FRC gray scale signal for each dot, thus presenting a palette of 262K/16.7M colors. This product adopted 6S2P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 50K hours, external backlight driver is additionally needed. COM50T5124XTC utilizes Parallel RGB (1 ch, 6/8-bit) as it's signal inputting systerm, which connected by 67 pins FPC with power supply voltage of 3.0V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-07-22
ET050SQ01-Z is a 5.0-inch diagonal TFT LCD display module product with integrated In-Cell touch technology. ET050SQ01-Z supports a 720×720 resolution with a square display format, delivering clear, vivid, and stable image performance for smart and industrial display applications. It adopts a MIPI interface for high-speed and reliable signal transmission, ensuring smooth and efficient display output. It features an active area of 91.37(W) × 91.37(H) mm and an outline size of 93.67(W) × 96.72(H) mm, providing a compact and balanced structure for easy integration. ET050SQ01-Z can provide 350 cd/m² typical brightness with a transmissive display mode, ensuring stable visibility and consistent visual performance under various indoor lighting conditions. The display supports an ultra-wide viewing angle of 85/85/85/85 (L/R/U/D), offering excellent readability and uniform image quality from all directions. Designed for industrial-grade reliability, it supports an operating temperature range of -20°C to 70°C and storage temperatures from -30°C to 80°C, making it suitable for smart home control panels, industrial equipment, medical devices, and intelligent terminal applications.
2026-06-18
ET050HD1-HT is a 5.0-inch diagonal TFT LCD display module product with integrated In-Cell touch technology. ET050HD1-HT supports a 720×1280 resolution with an optimized aspect ratio, delivering sharp, vivid, and stable image performance. It adopts a MIPI interface for high-speed and reliable signal transmission, ensuring smooth and efficient display output. It features an active area of 61.776(W) × 109.824(H) mm and an outline size of 64.08(W) × 115.76(H) mm, providing a compact and lightweight design for easy integration into portable devices. ET050HD1-HT can provide 450 cd/m² typical brightness with a transmissive display mode, ensuring clear visibility and balanced image performance under various lighting conditions. The display supports an ultra-wide viewing angle of 85/85/85/85 (L/R/U/D), offering excellent readability and consistent image quality from all directions. Designed for industrial-grade reliability, it supports an operating temperature range of -20°C to 70°C and storage temperatures from -30°C to 80°C, making it suitable for handheld terminals, smart devices, medical equipment, industrial control systems, and portable consumer electronics.
2026-06-18
ET050HD01-ZT is a 5.0-inch diagonal TFT LCD display module product with integrated In-Cell touch technology. ET050HD01-ZT supports a 720×1280 resolution with an optimized aspect ratio, delivering sharp, vivid, and stable image performance. It adopts a MIPI interface for fast and reliable signal transmission, ensuring efficient and smooth display output. It features an active area of 61.24(W) × 108.86(H) mm and an outline size of 83.59(W) × 135(H) mm, offering a compact and practical design for smart display integration. ET050HD01-ZT can provide 500 cd/m² typical brightness with a transmissive display mode, ensuring enhanced visibility and stable image quality under bright ambient conditions. The display supports an ultra-wide viewing angle of 85/85/85/85 (L/R/U/D), providing excellent readability and consistent visual performance from all directions. Designed for reliable performance, it supports an operating temperature range of -10°C to 60°C and a storage temperature range of -20°C to 70°C, making it suitable for smart handheld devices, industrial terminals, portable electronics, and consumer applications.
2026-06-18
ET050FH01-X is a 5.0-inch diagonal TFT-LCD display module designed for EV charger, industrial control, and smart energy applications. ET050FH01-X supports a display resolution of 720×1280 with a portrait aspect ratio, delivering sharp images and excellent visual performance. The display features a transmissive mode and MIPI interface for high-speed data transmission and seamless system integration. It provides an active area of 62.8(W) × 111.1(H) mm and an outline dimension of 66.4(W) × 120.05(H) mm. ET050FH01-X can provide a display brightness of 1000 cd/m², ensuring excellent sunlight readability and clear visibility in outdoor environments. With wide viewing angles of 80° in all directions (L/R/U/D), the module delivers consistent image quality from multiple viewing positions. Designed for reliable operation in demanding environments, it supports an operating temperature range of -20°C to 70°C and a storage temperature range of -30°C to 80°C. ET050FH01-X is supplied without a touch panel and is an ideal display solution for EV charging stations, smart kiosks, industrial HMI equipment, and outdoor energy management systems.
2026-06-05
TX13D204VM0BAA is a 5.0 inch diagonal a-Si TFT-LCD display screen with a built-in WLED backlight, without backlight driver, without touch screen. TX13D204VM0BAA supports display 800(RGB)×480 (WVGA) with aspect ratio of 15:9 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 108(W)×64.8(H) mm, outline size of 121(W)×80(H)×9.3(D) mm, viewing area size of 110.4(W)×67.2(H) mm, net weight of 90.0g (Typ.). As a IPS, Normally Black LCM product, TX13D204VM0BAA can provides 1300 cd/m² display brightness 1300:1 transimissive contrast ratio, 80/80/80/80 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 25 (Max.)(Tr+Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 70% (NTSC). This product adopted WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 70K hours, external backlight driver is additionally needed. TX13D204VM0BAA utilizes LVDS (1 ch, 8-bit) as it's signal inputting systerm, which connected by 50 pins FPC with power supply voltage of 3.3V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-04-24
ET050WV10-K is a 5.0-inch diagonal TFT-LCD display module featuring a transflective display mode. It supports a resolution of 800×480 with a 5:3 aspect ratio (W:H) and adopts a TTL interface for stable integration. The display offers an active area of 108 (W) × 64.8 (H) mm and an outline dimension of 120.7 (W) × 75.9 (H) mm. With a brightness of 280 cd/m², it ensures readable performance under both ambient and low-light conditions, making it suitable for cycling computer and bike display applications. It provides viewing angles of 65/65/35/55 (L/R/U/D) and operates within a temperature range of -20°C to 70°C (storage: -30°C to 80°C). This module does not include a touch panel.
2026-04-21
TM050RDZG03-00 is a 5.0-inch diagonal TFT-LCD display module featuring a transmissive display mode. It supports a resolution of 800×480 with a 5:3 aspect ratio (W:H) and adopts a Parallel RGB (1-channel, 8-bit) interface for stable integration. The display offers an active area of 108 (W) × 64.8 (H) mm and an outline dimension of 120.7 (W) × 77.8 (H) mm. With a brightness of 1000 cd/m², it ensures excellent visibility under strong ambient light, making it suitable for cycling computer and bike display applications. It provides viewing angles of 80/80/70/80 (L/R/U/D) and operates within a wide temperature range of -30°C to 85°C (storage: -40°C to 90°C). This module does not include a touch panel.
2026-04-21
ET050FH10-T is a 5.0-inch diagonal TFT-LCD display module featuring a transmissive display mode. It supports a resolution of 1080×1920 with a 9:16 aspect ratio (W:H) and adopts a MIPI interface for stable high-speed transmission. The display offers an active area of 61.88 (W) × 110.02 (H) mm and an outline dimension of 64.76 (W) × 118.7 (H) mm. With a brightness of 1200 cd/m², it ensures excellent visibility under strong ambient light, making it suitable for cycling computer and bike display applications. It provides wide viewing angles of 80/80/80/80 (L/R/U/D) and operates within a temperature range of -20°C to 70°C (storage: -30°C to 80°C). This module does not include a touch panel.
2026-04-21
A0500WVF2MAAA supports display 800(RGB)×480 (WVGA) with aspect ratio of 15:9 (W:H), whose pixels are arranged in RGB Vertical Stripe. It features active area of 108.6(W)×65.16(H) mm, outline size of 121.3(W)×78.8(H)×6.1(D) mm, viewing area size of 110.6(W)×67.16(H) mm, with surface treament of Hard coating, net weight of TBD. As a SFT, Normally Black, Transmissive LCM product, A0500WVF2MAAA can provides 1000 cd/m² display brightness 1000:1 transimissive contrast ratio, 88/88/88/88 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 30 (Max.)(Tr+Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 50% (NTSC). This product adopted 7S2P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 50K hours, external backlight driver is additionally needed. A0500WVF2MAAA utilizes Parallel RGB (1 ch, 8-bit) + SPI as it's signal inputting systerm, which connected by 50 pins FPC with power supply voltage of 3.3V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-04-07
COG-VLITT1654-08 is a 5.0 inch diagonal a-Si TFT-LCD display screen product from BOE, with a built-in WLED backlight, without backlight driver, without touch screen. COG-VLITT1654-08 supports display 640(RGB)×480 (VGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. It features active area of 100.8(W)×75.6(H) mm, outline size of 119.7(W)×92.8(H)×22.1(D) mm, viewing area size of 103.6(W)×78.4(H) mm. As a TN, Normally White, Transmissive LCM product, COG-VLITT1654-08 can provides 600 cd/m² display brightness . Gray scale or the brightness of the sub-pixel is determined with a 6-bit gray scale signal for each dot, thus presenting a palette of 262K colors. This product adopted 3S2P WLED as it's backlight systerm which was placed as Edge light type, external backlight driver is additionally needed. COG-VLITT1654-08 utilizes LVDS (1 ch, 6-bit) as it's signal inputting systerm, which connected by 20 pins Connector. It's typical vertical frame rate (Fv) is 60Hz.
2026-04-07
M050SWN1 R2 supports display 480(RGB)×234 with aspect ratio of 16:9 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 110.88(W)×62.478(H) mm, outline size of 124(W)×74.5(H)×7.3(D) mm, viewing area size of 112.6(W)×64.2(H) mm, with surface treament of Antiglare, Hard coating (2H), net weight of 91.5g (Typ.). As a TN, Normally White, Transmissive LCM product, M050SWN1 R2 can provides 585 cd/m² display brightness 500:1 transimissive contrast ratio, 70/70/50/60 (Typ.)(CR≥10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 15 (Typ.)(Tr+Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 60% (NTSC). This product adopted 6S2P WLED as it's backlight systerm which was placed as Edge light type, external backlight driver is additionally needed. M050SWN1 R2 utilizes Parallel RGB (1 ch, 8-bit) as it's signal inputting systerm, which connected by 40 pins FPC with power supply voltage of 3.3V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
2026-04-07
